Myalarm V-LCD1 Manuale delle Istruzioni Scaricare il pdf (Pagina 260)

PC/VDT PROGRAMMING - NETWORK OPTIONS

9-254

System 2 Installation / Programming Manual

Configure Network

If you choose to configure the network, the VDT will display:

Master Active

Slave 1 OFF

Slave 2 OFF

Slave 3 OFF

Slave 4 OFF

Slave 5 OFF

Slave 6 OFF

Slave 7 OFF

R = Reload Slave

TAB = Next field

SPACE = Toggle current field

ENTER = Done

This screen allows you to control the network by adding, deleting and reprogramming slaves.

Use the TAB key to position the cursor at the slave you want to control. At that point, use the

SPACE bar to toggle the slave on or off. If you are adding a slave at this point, the “OFF” will

change to “ON” when the master has successfully been added by the master. If at any point

you need to reload a slave with the current programming information (if, for example, the slave

has lost power and its memory has been cleared) TAB to the desired slave’s position and hit the

R key.

Slave Unit

If you chose to convert this unit to a Slave, the LCD will scroll:

Set Slave Box #

Enter Slave Num [0]

At the Enter Slave Num [0] prompt, make your selection.

You can choose a number between 1 and 7. After your selection, you will be prompted.

Unit is a Slave

1=Make a Master

2=Make a Standalone

3=Test RS485

Enter Net Option [0]

At the Enter Net Option [0] prompt, make your selection. If you are finished, just

press ENTER. You will return to the Main Menu.

If this unit is now programmed as a Slave, most of the Main Menu items cannot be accessed.

All programming must be accomplished using the Master.

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 335 336

Nessun commento

Myalarm V-LCD1 Manuale delle Istruzioni Pagina 260