Myalarm V-LCD1 Manuale delle Istruzioni Scaricare il pdf (Pagina 192)

PC/VDT PROGRAMMING - PORT CONFIGURATION

9-186

System 2 Installation / Programming Manual

Relay Type

When a valid code is entered, the Port’s door relay may be activated. How it will be activated

is what we are interested in here.

There are two modes of relay activation: Momentary and Latching. In Momentary mode, the

relay closes for a programmed time period ranging from 1 to 255 seconds. In Latching mode,

the relay toggles its state. In other words, if the relay was on, it turns off... if the relay was off,

it turns on.

Note: The main relay time for a two-door System 2 (2016) is 65535 seconds (18.2 hours).

The VDT will display the instructions:

1=Latching,2=Momentary

Relay Type [2]

At the Relay Type [ 2 ] prompt, pick the desired option followed by ENTER.

Momentary Time

If you chose momentary, the VDT will display the instructions:

Use 1 thru 255 Seconds

Momentary Time [__5]

At the Momentary Time [ __5] prompt, enter your selection followed by ENTER. If

you selected Latching, you are finished, you do not need to enter a Latching Time. As you can

see, you do not need to enter three digits here. A 5 is all that is needed to program this Port /

door for five seconds.

Automatic Port Operation

Assigning a schedule to a Port means that the Port's door relay will be automatically activated

at the times specified by that schedule.

At this point, the VDT will display the instructions:

Use 0 thru 6

0=No Schedule

Port Schedule [_0]

Note: If you have a two-door System 2 (2016) , the amount of schedules available is 16.

At the Port Schedule [_0] prompt, enter your selection followed by ENTER.

Example: If you programmed Schedule #1 - Cell #1 for an ON Time of 09:00 MTWTF and

Schedule #1 - Cell #2 an OFF Time of 17:00 MTWTF, this door will automatically unlock at 9:00

AM Monday - Friday and Lock at 5:00 PM Monday - Friday (if you select Port Schedule 1).

If you wish the door to be locked 24 hours a day, seven days of the week either press 0 and

ENTER or just ENTER. No schedule will be assigned to this door.

After you are finished assigning this Port Schedule, the unit will return to the main menu. If

you have additional doors, you must enter Option #5 again to program these ports.

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 335 336

Nessun commento

Myalarm V-LCD1 Manuale delle Istruzioni Pagina 192