Myalarm V-LCD1 Manuale delle Istruzioni Scaricare il pdf (Pagina 184)

PC/VDT PROGRAMMING - TIME SCHEDULES

9-178

System 2 Installation / Programming Manual

Now for a final note. What would this have looked like if, instead of granting or denying access

to users, we had instead wanted to unlock and lock a door? The beauty of this schedule system

is that we would simply have assigned the same schedule to a door instead of a user. In this

case, the door would have unlocked at 08:00 and locked at 18:00 Monday through Friday, and

would have remained locked on Christmas and New Year's Day. Later in this manual, we'll see

the mechanics of how to actually assign schedules. Now to programming schedules.

Choosing the Schedule

The first thing you will do is select which schedule you want to program.

The VDT will display the following instructions:

Enter Schedule #

Use 1 thru 8

0=Quit

Choose Schedule [_0]

At the Choose Schedule [ _ 0 ] prompt enter the schedule you want. Pressing 0

then ENTER to exit this option. If you wish to start with Schedule #1 press 1 then ENTER.

Note: If you have a two-door System 2 (2016) , the amount of schedules available is 16.

Choosing the Time Cell

After selecting the schedule, select that schedule's time cells you wish to program.

The VDT will display the following instructions:

This Schedule=01

Use 1 thru 32

0=Quit

Choose Schedule [_0]

Note: If you have a two-door System 2 (2016), the amount of schedules available is 16,

and the amount of time cells in each schedule increases to 64.

At the Choose Time Cell [ _ 0 ] prompt, pick the time cell you want. If you pick 0,

you will be returned to the Choose Schedule prompt, at which point you can select a new

schedule to program or you can leave the option by again selecting 0 then pressing ENTER.

Let’s say you wish to program cell #1, simply press 1 and ENTER. All initial programming of

cells must be entered sequentially (Cell #1 must be entered before Cell #2, etc.).

If you create an “ON” cell, you should have a corresponding “OFF” cell. Otherwise, the cell

will turn something on and never turn it off. This may be a condition you desire. If so, to turn it

off, you must use Main Menu Option 14.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 335 336

Nessun commento

Myalarm V-LCD1 Manuale delle Istruzioni Pagina 184