Myalarm V-LED1 Informazioni Techniche Scaricare il pdf (Pagina 7)

Zones can be manually excluded as you arm your security system (if they are inoperable or

if they would conflict with a planned activity). To enter Zone Bypass Mode, press + 6 .

The green ‘ready’ LED will blink to indicate bypass mode. Press to scroll upwards to the

desired zone, or enter the zone number (01, 02, 03, etc...). The LED of the selected zone will

light and its status wil be displayed:

Zone Status LED Status

Normal Zone LED + Ready LED

Open Zone LED only

Trouble Zone LED + Trouble LED

Bypass Zone LED + Bypass LED

Press to bypass the selected zone or to remove bypass. After adjusting the zone,

press to move to the next zone or to return to Zone Bypass Mode. Press a

second time to exit Zone Bypass Mode.

Zone bypass is erased every time you disarm. If you bypass zones regularly, ask your

security company about programming Quad Key buttons to automate this process for you.

A PIN number can be required before pressing 6 to bypass zones. Ask your security

company if you would like this feature activated.

[6] Bypassing Zones + 6

#

Clear

#

Clear

[7] Installer Programming

[8] User Programming + 8 + User PIN

This area is for security company use only.

System Users with appropriate authority can set User PINs, system time, auto-armimg

time, and other advanced features in this section. Only User PINs with authority levels 01

and 02 can access this area. See below for instructions regarding User Programming.

[9] No Entry Delay Arming & Utility Output + 9

During the exit delay period, enter + 9 to arm your system without entry delays. All armed

zones will create an alarm instantly. Anyone entering through a protected door will cause an

immediate alarm because the entry delay has been cancelled. This is sometimes used to

increase security after everyone has arrived home for the evening.

If your system is equipped to operate auxilliary devices, such as an electronic or magnetic

door lock, entering + 9 + Utility PIN will activate the device. Ask your security company

for additional information about adding or operating this feature.

7

Myalarm V-LED1 Informazioni Techniche Pagina 7