Myalarm V-LED1 Informazioni Techniche Scaricare il pdf (Pagina 4)

The green ‘Ready’ light indicates that all detectors are secure and ready to arm.

If the ‘Ready’ light is not on, one or more detectors are activating (open) and are

not ready to be armed. Depending on your system’s design, this may or may not

prevent your system from arming. Vision’s Zone Indicator lights display which

zone(s) have detectors which are in alarm (or open). Check the detector(s) on

the zone(s) and arm your system. If you are unable to reset the detectors and

return to ‘Ready’ mode, call your security company for assistance.

System Operation

- Arm without entry delay: press + during Exit Delay period.

- Arm without exit delay: press + during Exit Delay period.

- Your entire security system can be turned on by pressing the button for

approximately two seconds.

- A PIN number can be required before pressing to turn on the system. Ask

your security company if you would like this feature activated.

Additional Arming Options

After pressing to begin arming, keypads will beep slowly during the exit delay

period (if applicable). The tempo increases for the last ten seconds of the exit

delay period and a sustained tone indicates that the delay period has expired

and arming is now complete. After the arming process has been initiated, a valid

user PIN must be entered to cancel arming.

Utility

Quick

1 2 3 4 5 6 7 8 9 10 11

Nessun commento

Myalarm V-LED1 Informazioni Techniche Pagina 4