Myalarm V-LED1 Informazioni Techniche Scaricare il pdf (Pagina 5)

Vision allows system users to control many advanced features. This provides quick

service, greater convenience, and lower operating cost. Access these features by press-

ing and the feature number.

[1] Chime

[2] Smoke Detector Reset

[3] System Walk Test

[4] Viewing Alarm Memory

[5] Viewing System Trouble

[6] Bypassing Zones

[7] Installer Programming

[8] User Programming

[9] No Entry Delay Arming/Utility Output

[0] No Exit Delay Arming/Quick Exit

[1] Chime + 1

If your system is equipped, specified detectors can ring a chime tone from the keypads while

the system is disarmed. This chime can be turned on or off by pressing + 1 while the

system is disarmed. Two short beeps indicate that the Chime has been turned on, one long

beep indicates that the Chime has been turned off. The chime feature is automatically turned

off everytime you arm your system. Ask your security company if you would like the chime to

turn on automatically everytime you turn off your security system.

If your system has smoke detectors, press + 2 to reset the smoke detectors after an

alarm

[2] Smoke Detector Reset + 2

User Functions

Test your system monthly to ensure proper operation Follow this recommended procedure:

· Call your monitoring company to let them know you are testing your system.

· Confirm that all zones are ready (Green ready light is On).

· Press + 3 to initiate ‘Walk Test Mode’. All zone indicators will blink except for FIRE

zones and other 24Hr. zone types (these zone type must be tested by the security com-

pany).

· Activate each detector to confirm proper operation. The indicator for each zone will go out

as each zone is activated (check each detector seperately if there is more than one detec

tor on a zone).

· If operating the detector does not cause the indicator light to go out, test the detector

again. Contact your alarm company if a detector or zone does not operate properly.

[3] System Walk Test + 3

1 2 3 4 5 6 7 8 9 10 11

Nessun commento

Myalarm V-LED1 Informazioni Techniche Pagina 5